FAQ - Port. radio cass rec + cd

CD player functions:
- programmable memory
- shuffle
- repeat
- music search (next/previous)
Dual cassette deck:
- automatic recording level control
- high speed dubbing
- CD synchro copy start
DBB dynamic bass boost
80 Watt PMPO output power
4-band graphic equalizer
Bass reflex detachable speaker boxes
Microphone mixing facility
Headphone and microphone socket

Wave ranges : /01: FM stereo 87.5-108.0 Mhz
                   MW 526.5-1606.5 kHz
Aerials     : Ferroceptor for AM/MW and LW
              Telescopic aerial for FM

FM stereo

Wow and flutter       : 0.3% WRMS
Signal-to-noise ratio : 42 dB

Stereo dual cassette deck
Synchro start recording
High speed dubbing
Automatic recording level control
Suitable for normal (type I) cassette tape

Frequency range       : 30-16,000 Hz  3 dB
Signal-to-noise ratio : 80 dB

Programmable memory for up to 20 tracks
Shuffle plays tracks in random order
Repeat of one or all tracks
Next and previous keys for track skip
6-digit multifunction LCD display with flag

The CD player features the Philips patented Continuous
Calibration Digital-to-Analog Converter (CC-DAC). The CC-DAC
creates a very accurate conversion of the 16-bit digit bit flow
into the analog signal, resulting in a DISTORTION-FREE
reproduction of the CD signal.
This is accomplished by a circuitry that continuously makes a 
comparison and calibration between the Bit current sources used
in the converter and the single reference current of the Lowest
Significant Bit (LSB). All other bits including the Most
Significant Bit (MSB) consequently have an exact current value
and conversion leads to a precise analog wave shape.

Loudspeaker  : Two wide-frequency 100 mm (4") loudspeakers
Output power : 80 Watt PMPO; 2 x 2,5 Watt RMS

2 way bass reflex loudspeakers
DBB Dynamic Bass Boost
4-band graphic equalizer
Mixing facility of the microphone with tape, CD or tuner
Public address amplifier via the microphone connections

Bass reflex chambers:
To accentuate the low bass, Philips Portable Audio has introduced
the Bass Reflex Speaker System. In this system, the speaker boxes
are closed, and the backward radiation is used to support the
forward radiation. The air flow caused by the backward radiation
is fed through a port or pipe, acoustically tuned by its
dimensions to the lowest practicable bass frequencies (the
passband of the tuned port). All the notes above the tuned
frequency support the forward radiation; only the notes below it
remain opposed. The product of Bass Reflex Sound System is well-
extended low-frequency response, which creates a clear mid and 
high note sound perforce solidly supported by warm, deep low notes.

Loudspeakers     : Click-fit
Microphone       : 3.5 mm socket
Stereo headphone : 3.5 mm socket

Weight                : 6,1 kg
Dimensions (wxhxd)    : 598x271x221 mm
Mains cord connection : /01: IEC
Power supply          : AC mains: (50/60 Hz)
                        /01: 120-230V, 50-60 Hz (switchable)
Batteries             : 6x1.5V batteries, R20/D-cell/UM 1

Home | Top | Back
Philips Product List | DAP Product List
PCC Product List | CE Product info
Philips CCC general information
Philips refer to address list
Philips service warranty policy