FAQ - Clock radio

Wave ranges : FM 87.5-108 MHz
              MW 520-1606.5 kHz (577-187 m)
Aerials     : Ferroceptor for MW (and LW)
              Wire aerial for FM

Sensitive reception on FM and AM. 
FM wire and AM ferroceptor aerials. 
Thumbwheel tuning and slider waveband switch.  
Thumbwheel volume control. 
Loud, good quality sound from 77 mm loudspeaker driven by 280 mW output

Clock   : Electronic
Display : LED, red

Precision electronic clock, runs independently of radio. 
Large digital LED display.
Forward/reverse time set buttons.
Radio and buzzer alarm mode settings, with two individual alarm
 time settings and indications.
Power back-up keeps the clock running if the set is disconnected or
 the mains is interrupted. Display is suppressed.
Repeat alarm switch to put off alarm and reset approx. 9-minute repeat
 alarm memory.                   
Slumber switch puts on radio for any preset time up to 59 minutes;
 can be over-ridden by slumber off switch.

Loudspeakers      : 77 mm
Max. output power : ( 1 dB; D <= 10%)
                    0.3 Watts

Weight             : 0.7 kg
Cabinet            : Material/finish: Polystrene
Dimensions (wxhxd) : 220x55x145 mm
Power supply       : AC mains: 220 V, 50 Hz
Back-up battery    : 9 V, type 6F22

Home | Top | Back
Philips Product List | DAP Product List
PCC Product List | CE Product info
Philips CCC general information
Philips refer to address list
Philips service warranty policy